TPE Based Hydrophilic Swelling Rubber
EKASWELL SB400, Thermoplastic Elastomer (TPE) based hydrophilic particles with high swelling and long cycle capacity.
Application Areas
- Indoor and outdoor places.
- Pools, water tanks, treatment plants.
- In basic-curtain combinations.
- Pipe inlet and outlet.
- Construction joints in cable ducts.
- In tunnel segments.
- In the joints of old and new concrete.
- Used in construction joints.
Advantages
- Easy application.
- Flexible.
- Controlled swelling does not inflate suddenly in concrete casting and does not damage concrete.
- It is resistant to high salt concentration and various chemicals,
- There is no disintegration and.
- The cycle capacity is high.
Technical Features
| Expansion rate | >%400 |
| Elongation at break | %490/770 |
| Tensile strength | 1.1/2.1 Mpa |
| Color | Blue, Red, Yellow, Green (can be produced in all colors.) |
| Density | 1.25 g/cm3 |
| Hardness | 40 Shore A |
| Application | -30°C / 70°C |
*3% solution of sea salt in de-ionised water swelling ratio %100
*Does not contain bentonite.
Standart Measures
- EKASWELL SB4002005:20 MM X 5 MM
20 M/Roll (120 M per C.Box)
EKASWELL SB4002010:20 MM X 10 MM
10 M/Roll (60 M per C.Box)
Shelf Life
24 months unopened under suitable storage conditions (in a dry and cool environment, in its original packaging).
Documents
You can review the documents related to the product and contact us for additional documents.