Waterproofing Tape FLD
EKAPAH FLD is a thermoplastic elastomer (TPE) based mesh carrier bevel tape. There is a fold line on the thermoplastic elastomer (TPE) layer that allows easy folding.
Application Areas
- Chamfers at the floor and wall joints,
- In the insulation of wet areas,
- In the repair of static cracks,
- In the insulation of the joints of precast or reinforced concrete roof gutters.
Advantages
- Thanks to its design, it folds easily and provides significant time savings during application.
- It is thin and does not create extra thickness on the surface it is applied to.
- It provides adhesion and workmanship advantage thanks to its mesh-covered surfaces and elastic structure.
- It is resistant to temperature changes.
Method of Application
- Surfaces to be applied must be dry.
- Surfaces must be clean, strong, free from carriers and loose particles.
- Surfaces must be thoroughly cleaned from materials that reduce adherence such as oil, grease, dirt, paint, cement grout, rust, mold oil, salt vomit.
- The surface should be roughened by mechanical methods if required.
- EKAPAH tape is mounted on the joint or crack with a cement based adhesive and after the adhesive is dried, waterproofing procedure is applied on the surface. Cracks wider than 3 mm must be filled with suitable fillers prior to application.
EKAPAH FLD tape is mounted on the joint or crack with a cement based adhesive and after the adhesive is dried, waterproofing procedure is applied on the surface. Cracks wider than 3 mm must be filled with suitable fillers prior to application.
Technical Features
| Test | Standart | Birim | Değer |
| Tensile Strength (Transverse) | EN-ISO 527-3 (TİP 5 ) | MPa | 6,47 |
| Tensile Strength(Longitudinal) | EN-ISO 527-3 (TİP 5 ) | MPa | 11,93 |
| Elongation at Break (Transverse) | EN-ISO 527-3 (TİP 5 ) | % | 95 |
| Elongation at Break (Longitudinal) | EN-ISO 527-3 (TİP 5 ) | % | 22 |
| Hardness | ISO 868 | Shore A | 70 |
| Colour | RAL, PANTONE | ||
| Water Pressure Resistance | DIN EN 1928 (METOT B) | ||
| Thickness | mm | 0,55 | |
| Width | mm | 120/70 150/100 | |
| Weight | gr/mt | 39 |
*TSE(TURKISH STANDARDS INSTITUTION Report No: 312623/09-24
Product Code
Ekapah-120FLD: 120 x 70 mm
Ekapah-150FLD: 150 x 100 mm
Ekapah-120FLD-IK: 120 x 70 mm – Int. Corner
Ekapah-120FLD-DK: 120 x 70 mm – Ext. Corner
Ekapah-150FLD-IK: 150 x 100 mm – Int. Corner
Ekapah-150FLD-DK: 150 x 100 mm – Ext. Corner
Connectors (Corners)
Documents
You can review the documents related to the product and contact us for additional documents.